[Alberg30] unsubscribe

[Allan_Bart at ibi.com]

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org]On Behalf Of Mike Lehman
Sent: Tuesday, September 10, 2002 9:31 AM
To: public-list at alberg30.org
Subject: Re: [Alberg30] Deck Beam & Maint Manual



Randy,

I wouldn't worry about jacking up the beam. Do it a little at a time. I have
never seen anyone crack or break anything and this proceedure has been done
to dozens of boats. I have a template that is in 1/4" plywood that was made
by Washington Aluminum Products in Baltimore. They also have a CAD drawing
because they machine cut these, but they didn't give me a copy of the file
and I really wouldn't expect them to since they created it. You might want
to call Kirk at Washington Aluminum. If you want I'll send you the plywood
template, I'll probably need to cut it up so I could ship it. Let me know.

Mike Lehman 

"Gilleleje" #505 
"What is the use of a house if you haven't got a tolerable planet to put it
on?" Henry David Thoreau 
----Original Message Follows---- 
From: "Randy Weatherspoon" 
Reply-To: Alberg 30 public list 
To: 
Subject: [Alberg30] Deck Beam & Maint Manual 
Date: Mon, 9 Sep 2002 20:04:05 -0400 
1.) I have checked the sources for the deck beam and current price is
approx. $300. I have several friends with machine shops and would like to
price through them - does anyone have the pattern or would someone like to
sketch and measure theirs for future use of the group and myself - I could
draw up machine drawings suitable for fabrication. Also for those who have
done this I am a little nervous about jacking the existing beam up as I
don't want to damage the hull --down-- my deckbeam is only sagging but the
rigging is loose and I don't want things to get worse -- I will have the
mast off from transport and would like to do before restepping-- ? am
wondering if having set like this for a long period of time if it wouldn't
have taken a set in the current position making it hard to jack back into
position? 
2.) I have seen reference to a maintenance manual that is out of print or
something - would anyone be interseted in making a copy or putting it up on
a site for general reference? 
3.) I purchased Hull #385 last summer and then moved - tried to sell but
couldn't get a far price so I will be bring her to Miami to overhaul
(everything)--- I have been following public list with great interest -
especially various sources and will be putting together a notebook of the
same as well as notes and drawings of the effort in as close to scaled
drawings as is possible -- I have taken the brochure sketches and put them
in Autocad and will be adding to the layers as I go and would like to
incorporate as many of the original drawings as possible like the electrical
drawing only outlining it in ACAD to clean up and modify to present day. Any
sketches, drawing, scribles would be appreciated -- as I go through the
various systems- electrical-rigging-deck-hull-engine-sails-etc----- I intend
to try and condense some of the best of the public list for a new "Care and
Feeding / Rebirth" maintenance manual - this will include a resource
appendix - drawings -how t! o for each! 
of the subsystems specifically for the Alberg. I would also like to put
together a directory of ownership for each hull# with a picture of each if
possible---- 
Ambitious I know but what the heck - everyone needs a hobby ! 
Any ideas or advise are welcome ---I look forward to the project and hearing
from all of the Association- 
Thanks in advance 
Randy #385 
RANDY WEATHERSPOON 
Project Manager 
COASTAL SYSTEMS INTERNATIONAL, INC. 
464 South Dixie Highway 
Coral Gables, Florida 33146, USA 
Phone: 305-661-3655 x188 
Fax: 305-661-1914 
Email: rweatherspoon at coastalsystemsint.com 
Visit us at: http://www.coastalsystemsint.com 
This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged and
confidential. If the reader of this message is not the intended recipient or
the employee or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited. If you
have received this communication in error, please notify us immediately. 
+-----------------------------------------------------------+ 
| Sale on Yale & New England Ropes. Save up to 25 percent. | 
| http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 | 
+-----------------------------------------------------------+ 
_______________________________________________ 
Public-list mailing list -- Public-list at alberg30.org 
http://www.alberg30.org/mailman/listinfo/public-list 
To unsubscribe: email to Public-list-request at alberg30.org 
Include command "unsubscribe " in subject or body. 
Use command "help" for more options. 

  _____  

MSN Photos is the easiest way to share and print your photos: Click
<http://g.msn.com/1HM1ENUS/c156??PI=44364> Here


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020910/6a41c90b/attachment-0007.htm>