[Alberg30] Furling Systems

Brian Zinser bzinser at nmu.edu
Sun Sep 15 19:20:11 PDT 2002


I bought and installed the Profurl NC 32 this spring.  Installation went
fairly well except the extrusion wouldn't fit over my fittings and I had
to get a Sta-Lok eye, which in these parts adds at least 3-days to the
process.  Very satisfied.  Might want to wait and see if Sailnet puts it
on sale again.  I believe it was $1045 most of last winter.
 
Brian Zinser
#134 Manana
 
-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Timothy Stapleton
Sent: Sunday, September 15, 2002 9:42 PM
To: public-list at alberg30.org
Subject: [Alberg30] Furling Systems
 
I just bought hull #35 and will be starting in on a number of upgrades.
Some advice on jib furling systems would be helpful.  I am interested in
cruising rather than racing, and mostly on the Chesapeake and coastal
trips to New England.  I am thinking about the Profurl (either the 25 or
32).  I have been encouraged to look at Crusing Design (CDI) as well.
Any info would be helpful.
 
Tim S.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020915/bc626e62/attachment-0008.htm>


More information about the Public-List mailing list