[Alberg30] Filling deck holes

[Joyce Sousa]

I am currently using West Systems and 404 to fill the holes on Carina Vela.
Carbosil is too difficult to sand down.

Steve Sousa

********************************************************
----- Original Message -----
From: "Robert Kirk" <isobar at cablespeed.com>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Monday, September 23, 2002 8:02 PM
Subject: Re: [Alberg30] Filling deck holes


> I use Marine-Tex Putty which seems to have held well.
>
> Bob Kirk
> Isobar #181
>
>
>
>
> >I'm working on replacing some turning blocks and a stantion base and was
> >wondering what the opinions on filling deck holes are.  I've seen the
West
> >system epoxy and cabosil (sp?) used and it's what I was planning on
> >doing.  Any other opinions, or is that the best?
> >
> >--Tim
> >LinGin #244
>
>  +-----------------------------------------------------------+
>  | >>>>>>>>>>>>>>>> This month, save on all Harken products. |
>  | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
>  +-----------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
 +-----------------------------------------------------------+
 | >>>>>>>>>>>>>>>> This month, save on all Harken products. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1032833420.0