[Alberg30] Prop Zinc

[sousa, stephen (ENG)]

Another hint is place a "little" amount of 4200 on the screw threads, it
stops them from backing out when the zinc wears. I was also losing zincs
until I started using the 4200.

Stephen 
#114

-----Original Message-----
From: Capnreitz at aol.com [mailto:Capnreitz at aol.com] 
Sent: Wednesday, April 23, 2003 7:11 PM
To: public-list at alberg30.org
Subject: Re: [Alberg30] Prop Zinc


Richard,
Thankyou. I have lost two zincs and could not figure out why. Now I know.
Dances With Waves #457 Ralph Reitz
+---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
+---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org Include command
"unsubscribe <password>" in subject or body. Use command "help" for more
options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1051141995.0