[Alberg30] Beck Beam Details

[Hansen, Richard D LTC Student]

-Sunspur is on the hard with mast removed.  

-Mast removal seems to have allowed the deck beam to return to a position to
where the forepeak/closet door now closes without any binding.  

-My alum brackets need some minor mods at corners, but appear to fit against
beam ok.  

-There is, however, a 16 inch or so 3/4 inch piece of wood (teak?) in the
fore peak side of doorway.  It is flush with beam at center, but about
1/4-3/8 inch below beam on both ends of piece.  Separation of beam from
glass is evident when looking at this 16" piece of wood.  
Here are the questions:
1. Can I go ahead and install deck beam plates or would you recommemd that I
still jack up deck a bit?
Thank you.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1049482004.0