[Alberg30] Barnacles On Prop

[Miabarchet at aol.com]

My boat has been sitting at my dock since last Sept. I backed it out of my 
slip today and thought that I had run aground. I was barley able to make 
heady. I considered my self very fortunate to get it back in the slip. I was 
fairly certain I had 2 feet below my keel but I was not moving.

When we finally docked the boat I decided to check the prop, maybe it was 
fouled. What I found was that it was entirely covered with barnacles. I am 
assuming that is the cause of my problems; kind of like ice on an airfoil not 
providing lift.

As I recently became a certified diver I plan to try and clean the prop 
myself.
So here are my questions of the association.

1. Is my assumption correct, the barnacles are the cause of my problem?
2. Besides hammer and chisel or a wire brush does anyone have any suggestions 
for removing the barnacles?
3. As this is my first experience in brackish water is there any way to keep 
barnacles from forming on the prop? It has been my understanding that you 
don't put antifouling paint on the prop, or does that just apply to zincs?

Thanks again for being there.
Jim Allocco

 

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1051055240.0