[Alberg30] Cutlass bearing removal

[Bob]

I just pulled the shaft to replace stuffing box hose and to inspect
condition of shaft condition.
I would like to replace the cutlass bearing as well.

There are two set screws on the outside of the stern post flange that
hold the cutlass bearing in place.

These set screws have a slot for screwdriver removal.

I cannot remove these screws in order to remove the cutlass bearing.

They appear to be seized.
 
(Q1) Do I need heat or an impact tool to remove these screws?

I'm afraid of snapping the head off these set screws.

(Q2) Is the stern tube that fastens to stuffing box hose also fastened
to sternpost flange?



Any advice would be appreciated.

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1051106593.0