[Alberg30] Holding Tank Plumbing

Gordon LACO mainstay at csolve.net
Mon Apr 7 13:32:39 PDT 2003


on 4/7/03 3:31 PM, Dave Terrell at DTERRELL at message.nmc.edu wrote:

> excellent. I can't imagine there is much more room in the head area in
> the  post 409 boats. In addiiton to heating the hose to get to go on to
> the barbs, heating the hose to get to go around corners was also helpful
> too.Even  with the head gun it took some pulling to get the hose around
> corners. 
> 
> Good luck with it.
> 
>>>> sousa_stephen at emc.com 04/07/03 02:31PM >>>
> Dave,
> 
> Thanks, heat gun is my next purchase. As fellow Albergers know I am
> dealing
> with limited space and hose that doesn't like to bend in 30 degree
> temps.
> 
> Also the plate is completed fabrication and is plating. It should be in
> the
> mail to you within a week.
> 
> Stephen
> 
> -----Original Message-----
> From: Dave Terrell [mailto:DTERRELL at message.nmc.edu]
> Sent: Monday, April 07, 2003 1:46 PM
> To: public-list at alberg30.org
> Subject: Re: [Alberg30] Holding Tank Plumbing
> 
> 
> The instructions I recieved when I did myb plumbing last year was that
> a
> heat gun judiciously applied is the boat plumber's friend. It makes
> inflexible and uncooperative hoses flexible and cooperative. Too much
> heat,of course, cause the hoses to melt down so one needs to be
> careful.. This has worked for me.
> 
>>>> sousa_stephen at emc.com 04/06/03 07:55PM >>>
> I am currently installing the plumbing for the holding tank. Placing
> the
> hoses onto the 3-Way valves and fitting seems to be taking a lot of
> pressure. I applied soap and water with little success, the 1 1/2 hose
> seems
> to the most difficult. Does anyone have any tricks they have used to
> make
> this easier?
> 
> Thanks,
> Stephen
> #114
> 
>> +---------------------------------------------------------------+
>> |                This Old Boat by Don Casey                     |
>> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>> +---------------------------------------------------------------+
>> 
>> Public-list mailing list -- Public-list at alberg30.org
>> http://www.alberg30.org/mailman/listinfo/public-list
>> To unsubscribe: email to Public-list-request at alberg30.org Include
>> command "unsubscribe <password>" in subject or body. Use command
>> "help" for more options.
> 
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org Include
> command
> "unsubscribe <password>" in subject or body. Use command "help" for
> more
> options.
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> 
Hello folks - 

Before I put in my new head I have to remove the old factory installed
recirculating head.  I can't see how it is bolted in.  Anybody tackled that
job?

Gord
#426 Surprise

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1049747559.0


More information about the Public-List mailing list