[Alberg30] Bonding of hull fittings?

[Dave Terrell]

I do not see any evidence that my boat is bonded. My previous boat - the
CAL 27  - was bonded and it was easy to tell it was. I sail in Travese
City, Michigan  - a freshwater site.

>>> EddieDiver at aol.com 04/07/03 08:35PM >>>
There are 2 schools of thought on the wisdom or necessity of bonding 
thru-hulls, engine, prop shaft, etc. together with copper wire. This,
as I 
understand it, is to help prevent damage from different electrical
potentials 
aboard  a boat. Every thing i have read about the subject talks about
this 
potential problem when in "seawater". I take this to be salt water.

My question; are there many Albergs that have this bonding assembly?
Those in 
salt water? Those in fresh water? 

Emotional Rescue, #303, is in fresh Chicago lake water.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org 
http://www.alberg30.org/mailman/listinfo/public-list 
To unsubscribe: email to Public-list-request at alberg30.org 
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1049820095.0