[Alberg30] Tiller head fitting

[sousa, stephen (ENG)]

Tom,

Edson located in New Bedford manufactures the tiller head fitting for our
boats. From this list it would seem some boats have a shoulder bolt locking
the tiller head to the rudder stock and other have a 1/4" key way. I am not
sure which configuration is on your boat.

Stephen

-----Original Message-----
From: SwiftLaw at aol.com [mailto:SwiftLaw at aol.com]
Sent: Wednesday, April 16, 2003 11:08 AM
To: public-list at alberg30.org
Subject: [Alberg30] Tiller head fitting


Proud to announce that my lovely Terpsichore has successfully been 
transported from Chicago to Padanaram Harbor in Mass. ! Thanks to Nautic 
Marine Transport they were excellent and reasonable.

Issue: Much play between the tiller and the rudder post to which the tiller 
is affixed.

Can anyone recommend a fix for the vast play there and/or where to get a new

Tiller head fitting?

Tom Swift
#222
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1050508544.0