[Alberg30] Rudder Shaft stuffing box

[Bill Ydel]

    Mike, George, Tom and Lee
Thank you for your advice about access to the stuffing box. I have one more
question. What type of tools will I most likely need to stop the leak? The
boat is 200 miles and I don't want to get there and not be prepared.
Thanks as always

Bill
SallyB #441






----- Original Message -----
From: "Emy Amy" <montana8 at centurytel.net>
To: <public-list at alberg30.org>
Sent: Saturday, April 19, 2003 6:53 PM
Subject: [Alberg30] eng. no. for Sea Scout 91?


Hello Mike,

    I just purchased a 13' runabout with a Gray Marine sea scout 91 engine.
It is eng. no. H 1011.  Can you date it?   Is there a list if where engines
were shipped. (boat maker).  The head casting no. is Y400A  516 [    ] P.
Manifold is 5561 C.    Thanks   Hugh Nutting
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.


 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1050850451.0