[Alberg30] Yanmar 2GM20 Flexible Engine Mounts

[FINNUS505 at aol.com]

Talking about engine mounts................

That is my next project, after I get the stern tube, cutlass bearing, cutlass 
bearing housing, prop shaft, and prop back in the boat.

This boat, with her rebuilt Volvo MD 11 of unkown vintage, came with only 
three motor mounts. I did not know the port aft mount was not there until I 
cut the cockpit sole for the access panel, and could see the port aft corner 
of the engine!!!!!!

I have not tried to look at the other mounts yet to see if there is a serial 
number, or other ID to help me get the right replacement mount, but does 
anyone else have experience with this, and is there a direction I should be 
going in?  

Thx,
Lee
Stargazer #255
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1050884779.0