[Alberg30] Cutlass bearing removal

[Robert Kirk]

Tom... You're right; it is 5/8ths... Bob

>Robert ... I belierve that is a 5/8's in thread. At least that is what
>mine is. With eleven threads per inch.
>
>Tom S
># 412
>
>Robert Kirk wrote:
> >
> > Bob... I use a Canada prop nut zinc size "B". It comes as a set, with a
> > permanent holder  for 7/8 shaft with 3/8 thread and a replaceable teardrop
> > zinc. I replace the zinc itself yearly. It fits nicely in the rudder
> > aperture without modification. Available at West Marine and elsewhere.
> >
> > Bob Kirk
> > Isobar #181

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1051206453.0