[Alberg30] Zinc Anode location

[Voyager Toronto]

For a zinc anode protecting a prop/shaft to be effective, must it be in the 
water? I have no space on the shaft outside the hull, but a good 2 fingers 
width inside the hull forward of the stuffing box. The archives refer to a 
zinc one can fit over the prop-retaining nut, but this is less readily 
obtained. Inside the hull would also facilitate installation, inspection and 
replacement--no haulout required. Thanks for the replies on the prop 
aperture.
Calvin, Voyager#30

_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.  
http://join.msn.com/?page=features/junkmail

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.