[Alberg30] Zinc Specs

[quest433 at msn.com]

none...

zincs on the rubber are less effective than those attached to propeller shaft..or in the alberg case to the prop nut.

----- Original Message -----
From: Dan Pinson
Sent: Friday, August 15, 2003 8:45 PM
To: public-list at alberg30.org
Subject: [Alberg30] Zinc Specs

Hello,

I'm remote from my boat and having someone check the zincs. I'd like to  
tell them what anodes to buy before going into the water. Is there a size  
specification for the rudder zincs and the bolts that hold them on (or a  
pointer to an on-line source)? I saw the reference to the prop zinc in the  
archives so that's not a problem.

Thanks,
Dan

Dulcinea #78  
+---------------------------------------------------------------+
|                This Old Boat by Don Casey                     |
| http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
+---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1060995233.0