[Alberg30] Zinc Anode location

[Brian and Elaine Timmins]

If you want to protect it from electrolisis, it must be in the water !!!!!
If you put it inside the hull, you'll only protect the area directly under
the zinc and then, only from your inspection.
----- Original Message ----- 
From: "Voyager Toronto" <voyagertoronto at hotmail.com>
To: <public-list at alberg30.org>
Sent: Wednesday, August 27, 2003 9:56 AM
Subject: [Alberg30] Zinc Anode location


> For a zinc anode protecting a prop/shaft to be effective, must it be in
the
> water? I have no space on the shaft outside the hull, but a good 2 fingers
> width inside the hull forward of the stuffing box. The archives refer to a
> zinc one can fit over the prop-retaining nut, but this is less readily
> obtained. Inside the hull would also facilitate installation, inspection
and
> replacement--no haulout required. Thanks for the replies on the prop
> aperture.
> Calvin, Voyager#30
>
> _________________________________________________________________
> Tired of spam? Get advanced junk mail protection with MSN 8.
> http://join.msn.com/?page=features/junkmail
>
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1062002280.0