[Alberg30] Bilge Pump Access

[EddieDiver at aol.com]

On the Emotional Rescue, # 303, wwe have mounted the electric Rule bilge pump 
and an automatic float switch on the bottom horizontal leg of an aluminum 
angle. The angle is made from a 1/16 inch thick, 2 inch by 30 inch plate, bent 
horizontally at the bottom about 6 inches to hold the pump and switch. The 
vertical portion of the unit is supported to the forward vertical portion of the 
engine bilge with two 1/4-20 bolts with wing nuts. We left sufficient excess in 
the electric wires to allow the unit to be lifted out onto the cabin sole for 
cleaning. Ed. Schroeder
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1070581113.0