[Alberg30] anchor light wiring

[Larry Morris]

J.

See what you started.  Trouble maker

Fair Winds

Larry Morris
Solstice #501


-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org]On Behalf Of J Bergquist
Sent: Wednesday, February 12, 2003 4:18 PM
To: Alberg 30 public list
Subject: Re: [Alberg30] anchor light wiring


Mike-

forget the spreaders. I think I'll make swiss cheese out of my upper 
mast section in order to get that weight down so I can use 8 gauge wire 
for my anchor and spreader lights. That way I'll get that voltage drop 
WAY down.

Maybe I'll see if I could get the batteries out of the bilge by mounting 
one on each spreader. By drilling all those holes in the upper mast 
section, I figure I should be able to compensate for the additional 
weight aloft.

I don't eat at McDonalds, but for some reason, I thought Big Mac patties 
were smaller than 1/4 pound.

Thank you all for the advice.

J

_______________________________________________

UPDATED: http://alberg30.org/store/AbeBooks.html
_______________________________________________

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

_______________________________________________

UPDATED: http://alberg30.org/store/AbeBooks.html
_______________________________________________

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1045111803.0