[Alberg30] Re: soldered wiring

[gordon white]

  Many years ago I re-installed the wiring panel and carefully soldered
the connections. Did a good job, too, using rosin core solder.
Unfortunately, on a boat you get enough motion that the stiff
solder-covered portions of the wire end tended to fail through fatigue.
And even rosin flux seemed to attract corrosion, or at least moisture.
So now I crimp my connections. They have lasted about nine years so far.
ALWAYS use stranded marine-grade wire.

 Gordon White A-275, BRIGADOON II


_______________________________________________

UPDATED: http://alberg30.org/store/AbeBooks.html
_______________________________________________

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1045260005.0