[Alberg30] Masthead order

[sousa, stephen (ENG)]

Dave,

I discussed this issue with the fabricator this morning. He suggested making
a cardboard template of the mast in two pieces. He could use this to build
the mast head. Please send the template to the following address. I should
have final cost when we know how many mast heads he will be fabricating.

Address:

Stephen Sousa
66 Emery Road
Townsend, MA 01469

Regards,
Stephen

-----Original Message-----
From: David Flemming [mailto:flemming.smb at ns.sympatico.ca]
Sent: Friday, January 24, 2003 12:21 AM
To: public-list at alberg30.org
Subject: [Alberg30] Masthead order


Stephen,
                I am interested in ordering one for Mirradong (# 365 ,
1969 ) but my mast is still stepped on boat
         Any  chance of fabricating one to fit without old masthead ?


Dave Flemming

_______________________________________________

Looking for a hard-to-find or out-of-print book?  Or just any book, but 
looking for a good deal on a used book?  Check the Advanced Book Exchange,
one of my personal favorite online stores!
http://alberg30.org/store/AbeBooks.html
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
_______________________________________________

Looking for a hard-to-find or out-of-print book?  Or just any book, but 
looking for a good deal on a used book?  Check the Advanced Book Exchange,
one of my personal favorite online stores!
http://alberg30.org/store/AbeBooks.html
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1043424382.0