[Alberg30] Salon Window Leaks

[John Allen]

I used a very sharp flat, flexible, 1.5" spatula which would be used to
spread hole filler, to cut the grey rubbery substance.

I found that adding a compressible tubing similar to windshield washer hose
between the window plastic and inner frame all the way around helped to keep
pressure on the joint since the "glass"  doesn't fill the cutout well.
Seems to be a regular maintenance problem for this series of hull.  I have
thought of leaving a small drain opening in the outside frame at the bottom
to remove standing water, but a channel would have to be cut in the
fiberglass of the outer cabin.

I wonder if others have tried this?

Skybird #522

----- Original Message -----
From: "Bob" <bob at fox.nstn.ca>
To: "Alberg30" <public-list at alberg30.org>
Sent: Monday, June 09, 2003 10:27 AM
Subject: [Alberg30] Salon Window Leaks


> Hi All,
>
> I have one of the large windows that leak in the salon.
> It is a small leak just enough to make an annoying wet spot on the settee
> cushion.
> I have removed the bolts in the frame, but I cannot get the frame off.
>
> It looks like a grey caulking compound between the window frames. Perhaps
it
> is the original sealant.
>
> How do I remove the frame?
>
> It would be nice to remove the frame with little damage to the window.
> There must be a few tips and tricks to do this.
> I am afraid of bending the window frame in order to reseal the frame.
>
> If and when I could remove the frame, what caulking is recommended for
> sealing the window frames?
>
> Thanks,
>
> Bob
>
> A30 #560


 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1055192254.0