[Alberg30] Mast Step

[Kevin Blanc]

You know, I think Joe Credit had this same problem fixed... you might 
look him up in the yearbook and give him a call.

My mast rests on a stainless plate and there isn't a lot of corrosion 
between the base of the mast step and the plate.

How does the plate attach to the mast?

Randy Weatherspoon wrote:

>Thanks to everyone for the info on the rudder.
>
>Next Problem -- Mast Step
>The aluminum has broken at the bolts on the top plate of the mast step and 
>I was going to have a replacement made ---my machine shop is stressing SS 
>but I am concerned about galvanic corrosion and weakening the mast  --any 
>thoughts -- is it really that bad?
>I was wanting to build the hinge like Yves and they could work SS easier
>
>Thanks for the help
>Randy #385
>
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
>
>Public-list mailing list -- Public-list at alberg30.org
>http://www.alberg30.org/mailman/listinfo/public-list
>To unsubscribe: email to Public-list-request at alberg30.org
>Include command "unsubscribe <password>" in subject or body.
>Use command "help" for more options.
>


 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1055367462.0