[Alberg30] HELP!!!!!!!!!!!!!!!!!!!

[Dave Terrell]

I had a similar experience with my CAL 27 - once cleaned, the treads
worked fine.

>>> FINNUS505 at aol.com 06/19/03 11:08PM >>>
Hey Jim,

That was it; the threads in the old turnbuckle I had were seriously
caked 
with some old material that once must have passed for lubricant. I
cleared the 
thread with WD40, and it fit the thread.

Thanks alot for the info. Of course, I should have figured this one out
on my 
own. I am getting punchy, and assumed the worst when I wasn't able to
turn 
the replacement turnbuckle on first try.

Thx again,
Lee

In a message dated 6/18/03 8:55:27 PM Eastern Daylight Time,
quest433 at msn.com 
writes:

<< When you buy a turnbuckle you get all 3 pieces, the barrel, left and
right 
hand threaded pieces.  What you do is through away the piece that's 
equivalent to the one crimped onto the shroud and use the other 2
pieces, or just use 
the barrel.  If the reason that your saying you need a new barrel is
galling, 
then the threaded pieces may need replacement too.  Closely inspect the

threaded pieces, if there's signs of spalling or galling you might want
to buy a dye 
and see if by chasing the threads you can remove material that >>
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org 
http://www.alberg30.org/mailman/listinfo/public-list 
To unsubscribe: email to Public-list-request at alberg30.org 
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1056464633.0