[Alberg30] attaching exhaust hose

George Dinwiddie gdinwiddie at alberg30.org
Sun Mar 9 15:18:56 PST 2003


My exhaust pipe is 1-1/4" standard iron pipe, culminating in a piece of 
1-1/4" bronze nipple with a bronze water injection pipe brazed into the 
side at an angle.  According to 
http://ourworld.compuserve.com/homepages/mjvanvoorhis/t103.htm 1-1/4" 
pipe has an O.D. of 1.660", which corresponds pretty well to my own 
measurements (a shade over 1-19/32").

I'm trying to put a piece of 1-1/2" I.D. hose over this.  It looks as if 
the last time I did so, I cut the inner lining on the end of the pipe 
and allowed hot water and exhaust to get between the layers of the hose. 
  This has caused premature deterioration of the hose.

The problem is that this is a long way to stretch a hose.  The inlet to 
the muffler is only about 1-17/32" O.D. and the fit is not difficult. 
I'm worried about using any sort of lubricant, here, for fear that it 
will never seal well.  I've wondered if using a slightly cheaper exhaust 
hose (this is Shields premium hose, with the blue & green stripe down 
the side and spiral wire reinforcement) might stretch a little easier 
and last longer than mistreated expensive hose.

So, I thought I'd ask the collective wisdom.

  - George

-- 
  ----------------------------------------------------------------------
   Hope your road is a long one.                        George Dinwiddie
   May there be many summer mornings when,       gdinwiddie at alberg30.org
   with what pleasure, what joy,                 http://www.Alberg30.org
   you enter harbors you're seeing for the first time;
                                            from 'Ithaka' by C.P. Cavafy
  ----------------------------------------------------------------------


 +======================================================================================+
 |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents per foot     |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?pid=25719 |
 +======================================================================================+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1047251936.0


More information about the Public-List mailing list