[Alberg30] cockpit coamings

[Jay Davenport]

I am refinishing my cockpit coamings on Revolution, A30 #526. Getting them off was very difficult, as the prior owner apparently put a two-sided rubber tape between the wooden coaming and the fiberglass deck. This acted as a caulk/adhesive, which bonded the wooden coamings to the fiberglass. I assume that the reason for putting it there was to avoid having deck water run under the coaming and into the cockpit. I don't plan on replacing it, as the problem of deck water seems pretty minimal to me. Does anyone have any other thoughts on this? 

Jay Davenport

 +======================================================================================+
 |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents per foot     |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?pid=25719 |
 +======================================================================================+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1047253622.0