[Alberg30] Deck repair

[George Dinwiddie]

Peter,

I used my old 7-1/4" circular saw when I did the cockpit sole (my first 
fiberglass job).  It worked, but the glass destroyed the blade and the 
bearings in the saw.  Now, I just use the grinder (see 
http://www.alberg30.org/maintenance/tools/grinder.html).  It makes a lot 
of dust, but you've got to grind a bevel for laying up the new glass, 
anyway.

I don't think you need to support the foredeck, but you can't put your 
weight on the single-layer glass.  You'll probably want to stand on 
something off the boat, if you can.  Working at waist level is much easier.

  - George

p.a.amos at tesco.net wrote:
>> Tait Tait #478 has foredeck delamination.Our manual article
>> suggests the use of a router to cut out the surface layer and the
>> "Glissando" site recommends a Porter Cable 6inch Saw Boss.I'm not
>> familiar with either of these tools.Both sources are based on
>> experience of use.Anyone know the pros and cons of these tools?Also
>> is it advisable to support the underside of the foredeck before
>> until the repair is finished.
> 
> Peter Amos

-- 
  ----------------------------------------------------------------------
   Hope your road is a long one.                        George Dinwiddie
   May there be many summer mornings when,       gdinwiddie at alberg30.org
   with what pleasure, what joy,                 http://www.Alberg30.org
   you enter harbors you're seeing for the first time;
                                            from 'Ithaka' by C.P. Cavafy
  ----------------------------------------------------------------------

 +---------------------------------------------------------------+
 |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
 | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1047401602.0