[Alberg30] Atomic 4 exhaust riser

[chrishardy]

Moyer marine has them in stock   chris

Jay Davenport wrote:

>George,
>
>Thanks for the advice on backing plate epoxy.
>
>I am going to replace the exhaust riser on my Atomic 4. The diagram on the A30 website is great. My exhaust flange needs to be replaced as part of this job. Is this something I can buy, or does it have to be made? Is it ok to have a steel flange connected to a bronze riser?
>
>Jay Davenport
>
>Revolution, A30 #526
>
> 
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
>
>Public-list mailing list -- Public-list at alberg30.org
>http://www.alberg30.org/mailman/listinfo/public-list
>To unsubscribe: email to Public-list-request at alberg30.org
>Include command "unsubscribe <password>" in subject or body.
>Use command "help" for more options.
>


 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1048509574.0