[Alberg30] Atomic 4 exhaust riser

[George Dinwiddie]

Jay,

The exhaust flange is a Westerbeke part.  You can get them from Moyer,
Vosbury or any other dealer.  There's no problem hooking the bronze to 
steel.  The steel's going to rust in any event.  My current exhaust is 
steel except for the mixing tube.  I think my next will be all bronze.

  - George

Jay Davenport wrote:
> George,
> 
> Thanks for the advice on backing plate epoxy.
> 
> I am going to replace the exhaust riser on my Atomic 4. The diagram
> on the A30 website is great. My exhaust flange needs to be replaced
> as part of this job. Is this something I can buy, or does it have to
> be made? Is it ok to have a steel flange connected to a bronze riser?
> 
> 
> Jay Davenport

-- 
  ----------------------------------------------------------------------
   Hope your road is a long one.                        George Dinwiddie
   May there be many summer mornings when,       gdinwiddie at alberg30.org
   with what pleasure, what joy,                 http://www.Alberg30.org
   you enter harbors you're seeing for the first time;
                                            from 'Ithaka' by C.P. Cavafy
  ----------------------------------------------------------------------

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1048517340.0