[Alberg30] Packing nut/seal for prop shaft

Hansen, Richard D LTC Student Richard.Hansen at carlisle.army.mil
Wed May 21 09:21:41 PDT 2003


Sunspur has been out of water for 6 months.
Packing seal (proper term?) to prop shaft was OK/fine when it left water.
Will that seal deteriorate out of water such that I should change it
absolutely?  Or do the seals perform after hiatus from water?

Another prop shaft question.  I moved a rotten "donut" from between the prop
and hull.  2 semi-circle donuts screwed together at edges.  What is that and
must I replace and if so West Marine #?

Thanks again for your patience and knowledge.  Did not find these topics
readily in manual or website.  
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.



More information about the Public-List mailing list