[Alberg30] Thru Hulls

[chrishardy]

Might get interesting when you rinse the dinner dishes in the sink while 
motoring motor sucking air, food bits, etc

DickInVA wrote:

>On an Alberg30 there are 4 thru hull fittings in close proximity to
>each other.  2 for the helm deck for drainage, 1 for the engine intake
>water, 1 for the sink drain.  Each thru hull is a possible point of
>failure.  I was wondering if it would be a smart idea to combine all
>the thru hulls internally (using "T's")into one and block off all the
>other 3 fitting. In other words use the engine intake for all the other
>3 drains.
>
>Dick & Diana
>MyLady #302
>
>__________________________________
>Do you Yahoo!?
>The New Yahoo! Search - Faster. Easier. Bingo.
>http://search.yahoo.com
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
>
>Public-list mailing list -- Public-list at alberg30.org
>http://www.alberg30.org/mailman/listinfo/public-list
>To unsubscribe: email to Public-list-request at alberg30.org
>Include command "unsubscribe <password>" in subject or body.
>Use command "help" for more options.
>


 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1053558325.0