[Alberg30] Thru Hulls

[DickInVA]

On an Alberg30 there are 4 thru hull fittings in close proximity to
each other.  2 for the helm deck for drainage, 1 for the engine intake
water, 1 for the sink drain.  Each thru hull is a possible point of
failure.  I was wondering if it would be a smart idea to combine all
the thru hulls internally (using "T's")into one and block off all the
other 3 fitting. In other words use the engine intake for all the other
3 drains.

Dick & Diana
MyLady #302

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1053548766.0