[Alberg30] Winter project questions

Pete petejill at sprynet.com
Sun Nov 9 20:47:57 PST 2003


When I replaced the traveler on my '66I had Schaefer bend it to the curve of
the deck.  It made the installation much easier.

Pete H.
----- Original Message -----
From: "Bill Blevins" <billblevins at mac.com>
To: <public-list at alberg30.org>
Sent: Sunday, November 09, 2003 7:18 AM
Subject: [Alberg30] Winter project questions


> When upgrading the traveller from a 1966 original, do you buy a traveller
track that can be bent slightly to the curve of the aft end of the cockpit
or do you somehow shim underneath the track to keep it flat?
>
> Yesterday I removed the rudder shoe from the keel. The pin looked great.
It seems that the movement at the bottom of the rudder was wear on the
rudder fitting and not the pin or shoe. I'm leaning towards just leaving it
now that I'm sure it won't fall off. (it actually looks like quite a bit of
work to remove the rudder - digging through a nice finish to find the bolts
and all.
>
> We didn't notice any vibrations when sailing or motoring this year so I
might just tackle my other projects instead of dealing with removing the
whole rudder at this time. The rest of the rudder and tiller connection
seems to be in good order. Thoughts?
>
> (I just reread a Sept 1985 rudder article and I think I just convinced
myself to "don't fix what's not broken".)
>
> Final question. How do you know when through hull fittings need to be
replaced? From the inside they all appear to be sound. Maybe a little green
here or there. From the outside they are painted over. The exhaust hose
through hull looks the worst but it's above the water line. It actualy
appears to be the newest.
>
> One note of praise for the structure of the A30. Nothing on my boat seems
to have been mounted on deck with a backing plate. I am amazed at the
condition of the deck in areas where there should have been tremendous
forces and things bolted to it with only a couple of small washers and nuts
below deck. The paint and gelcoat - some areas looks original - isn't even
crazed!
>
> Bill Blevins
> Sabrina #158
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1068439677.0


More information about the Public-List mailing list