[Alberg30] standing rigging, and hatches

[George Dinwiddie]

Thanks, Jay.  I did mean 3/8".

  - George

Jay Davenport wrote:
> George,
> Did you mean 5/8" bolts or 3/8" bolts?
> Jay
> 
> George Dinwiddie <gdinwiddie at alberg30.org> wrote:
> Most importantly, upgrade to 5/8" bolts for the chainplates (or double 
> the number of 1/4" ones) if this hasn't been done. Also, make sure the 
> bolts aren't threaded their entire length, as this weakens the bolt 
> considerably.
> 
> While you're at it, you'll want to check the attachment points to make 
> sure they're in good condition. Also add backing plates for the 
> chainplates, or at least use fender washers. Recaulk the chainplates, too.
> 
> Check the wire, itself, for cracks and fishhooks. You can wrap a 
> cottonball around and run it along the wire. It shouldn't catch on 
> anything.

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------




 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1069026095.0