[Alberg30] Tiller delamination

[Alfredo]

This past summer I had the same issue on Free Spirit. I fixed the
tiller using epoxy instead of glue. 
I also had a second tiller made out of ash, this tiller was coated with
several coats of epoxy. The final product looks as if it had been
varnished. 



--- Richard Mair <r.mair at sympatico.ca> wrote:
> One of this winters projests is ti fix a delaminating tiller. Has
> anyone 
> had to do this before? I am thinking of just regluing the strips that
> 
> are coming apart with a good wood glue before refinishing.
>     going to either Varnish or Bristol finish. I know this is more
> work 
> but I like the deep finish.
> Has anyone used bristil finish? They claim more duradility than
> Varnish.
> 
> Richard
> 609 "into the blue"
> 
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1069631444.0