[Alberg30] Jib track

[Bill Blevins]

My A30 is a 1966. The sail track for the jib is screwed down on the outside
toe rail. 

If you mount the toe rail track for the ginny on the top of the wood, how
hard is it to bend that to get the curve right? Do you heat it and beat it
into submission?

I think it's a 1" wide track. The port side has been hit so the car won't
come back past a certain point. I either need to replace or take it off and
try to smooth out the curve back to it's original shape.

Has anyone done something different? (location)? How about cars that are
adjustable with control lines instead of the screw down type?

Bill Blevins
Sabrina #158

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1065448079.0