[Public-list] Anchor Handling

[Meinhold, Michael J]

The other thing I can see you have that I don't is reasonable-sized chocks
for the bow breastlines.
That's something else to replace this winter......

Now come to think of it, I do have a cowling that must fit in that hole in
the foredeck!

Regarding the A4 - I can't be sure until I get it back together, but I think
it's the head gasket failed between 3 and 4. 
I got some compression (via the thumb test) but not enough on 3 and 4 . The
engine would run in neutral and reverse but stall in forward.  With the head
off, the valves and seats don't look terrific, but they seem to close.

After the parade the electronic iginition failed - that took a few weeks to
track down and fix. I finally got it all working two weeks ago and we had
her out Saturday running fine. Took her out Sunday and it started stalling
in forward. If I can get it running this weekend I will feel like the season
is saved!

Mike


-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org]On Behalf Of George Dinwiddie
Sent: Wednesday, August 25, 2004 2:29 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Anchor Handling


On Wed, Aug 25, 2004 at 02:06:16PM -0400, Meinhold, Michael J wrote:
> I guess you are all talking about a forward ventilator that I don't have.

http://alberg30.org/maintenance/disorganized/Stem/P3310017.jpg barely
shows our ventilator on the right-hand side.  You can see the rode
doubled in the ventilator, as the anchor is off in that photo.  The
shackle end of the rode is wrapped around the ventilator and inserted
back down it.

http://alberg30.org/maintenance/disorganized/bowroller/TomSutherland/Mvc-001
f.jpg
shows a screw-in plate where we have the ventilator.
 
> I will look at putting in a bow chain pipe. I like the idea of anchoring
> from the cockpit and walking the end forward when the anchor is set. The
> problem is clearing enough space in the cockpit lockers or lazarrette for
> anchor and rode!

I would not put the anchor in the lazarette (as we *used* to do).  It's
a bit heavy to be that far aft.
 
> On another note, we have been absent from raft-ups and cruises because of
a
> non-functioning engine. The latest issue was low compression on two
> cylinders, so I took the head off and will put it back on tonight. I have
to
> do a few torquing cycles in neutral, but I hope to run it under load on
> Saturday!

Was the problem the head gasket?  Or the valves?  Hope to see you on the
water, soon!

 - George
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1093459192.0