[Public-list] teak runners between toe rail and track

[James Schueler]

Brian,

I bought two pieces of 6' long teak from West Marine and made the
spacers out of that. I don't remember the width but you can determine
that for yourself; just remember....the cut takes a good size piece away
from the whole; buy a wide enough piece to make up for it. I think I
paid just over $30.00 per piece.

James Schueler
"Oddyseus" #170

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of brian curry
Sent: Tuesday, August 03, 2004 3:43 PM
To: public-list at alberg30.org
Subject: [Public-list] teak runners between toe rail and track

I need to replace the teak spacers between the track and the toe rail
and am 
wondering who can advise on that.  I had seen some emails about this a
few 
months ago and someone suggested fender washers, others suggested 
fiberglass.  I really would like to stay with the teak or fiberglass and
am 
looking for adivce from those who have done this, or better yet, from
anyone 
who may have made new ones and replaced them.   Also, does anyone have a

template of somekind of the spacer?  The spacers on my boat are way too
gone 
and in too many pieces to make heads of tails of them.

Brian Curry
Makai  #151
Tampa Bay

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's
FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


 1091563223.0