[Public-list] Chainplate covers?

[George Dinwiddie]

On Tue, Dec 14, 2004 at 11:49:59AM -0500, Roger L Kingsland wrote:
> Don,  I need to check but don't the chain plates go through the inboard side
> of the hull to deck joint which is solid?

It depends on your boat whether or not this is solid.  On Calypso, #543,
the balsa typically goes virtually to the edge of the deck.  Where I've
recored, I tend to lay solid glass under the fittings.

 - George


 1103044728.0