[Public-list] shaft length

[sousa, stephen (ENG)]

The measurement for the shaft from #114 is 7/8 in diameter X 29 1/2 inches
long. I  
am not sure if this will fit with the 3gm, I have the 2gm which has a
shorter block. The actual length would depend on your the bed and placement
of the motor. 

If the installation is from a gas to diesel the pitch for the prop may
change due to the power curve. I am running a 13 X 13 sail pitch and have
excellent performance. You will love the Yanmar, excellent fuel economy and
starts in all type of cold temperture conditions. I would also recommend
15W40 Chevron Delo 400 which I run in the Yanmar and my Cummins, great all
around oil and is available at Walmart. 

Stephen 



 -----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of JBrouss667 at aol.com
Sent: Tuesday, July 06, 2004 5:03 PM
To: public-list at alberg30.org
Subject: Re: [Public-list] shaft length


I will be changing out the shaft when I haul the boat in a few weeks but 
would like to order the shaft(new) so I can have it ready. Do any of the A30

owners know the shaft length.     Thanks in advance!

P.S. this is for a yanmar 3gmf
_______________________________________________
Public-list mailing list
Public-list at alberg30.org http://alberg30.org/mailman/listinfo/public-list

 1089149297.0