[Public-list] Sink Pump Priming

[Mike Lehman]

I just suck on the spigot until water comes out.



Mike Lehman
"Gilleleje" #505

~~~_/)_/) ~_/) ~~





----Original Message Follows----
From: Jay Davenport <jay at saildriver.com>
Reply-To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Subject: Re: [Public-list] Sink Pump Priming
Date: Wed, 9 Jun 2004 18:07:03 -0700 (PDT)

Your pump may simply need priming. Most of these pumps are easy to prime. 
Unscrew the nut around the metal spigot, where it joins the plastic body of 
the pump. Pull the spigot straight up to remove from the body. Now pour 
water into the body. Replace the spigot and tighten the nut. Now when you 
pump, it should be primed.

Jay Davenport
Revolution, A30 #526

Peter Amos <p.a.amos at tesco.net> wrote:
If you removed hoses from filter and pump and transposed them when
reconnecting that may do it as I know from personal experience.
Peter Amos
Tait Tait #478

_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list



 1086871695.0