[Public-list] Reverse

[John Birch]

If the shaft has not slipped out loose but not out of the coupling, is it
possible the transmission is now slipping, requiring you to open up the
trans cover plate and rotate tighter the large threaded cylinder one notch
to tighten things up - I haven't got the book infront of me but I am
assuming you have the mechanical SAID trans.
Cheers,
John
----- Original Message ----- 
From: "Gordon Laco" <mainstay at csolve.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Thursday, June 17, 2004 8:24 PM
Subject: Re: [Public-list] Reverse


> I checked that...
>
>
>
> > Have you been over the side?
> > If not - it is very likely all the weed did not go.
> > Cheers,
> > John
> >
> > ----- Original Message -----
> > From: "Gordon Laco" <mainstay at csolve.net>
> > To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
> > Sent: Thursday, June 17, 2004 6:44 PM
> > Subject: [Public-list] Reverse
> >
> >
> >> Hello there -
> >>
> >> I was running my Atomic IV in reverse at fairly high rpm for a few
seconds
> >> the other day to clear weeds from the prop...now I suspect that I do
not
> >> have the same level of power in reverse that I seemed to have
before...is
> > it
> >> possible that I have damages something?
> >>
> >> Gord
> >> #426 Surprise
> >>
> >> _______________________________________________
> >> Public-list mailing list
> >> Public-list at alberg30.org
> >> http://alberg30.org/mailman/listinfo/public-list
> >
> > _______________________________________________
> > Public-list mailing list
> > Public-list at alberg30.org
> > http://alberg30.org/mailman/listinfo/public-list
> >
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1087518879.0