[Public-list] Interlux Brightside

[C.B. Currier]

Bill,

Have you gotten drips or bullets as a result of your spraying?

If so the definitely redo those areas with 220 to 300 wet sanded. Actually
go the reverse, do 300 wet sand and if it does not work then go to 220.

I have to say if you need to do it again but feel the job is near perfect
then step back 10 feet and realize that this view is the closest most
people will come to your paint job. Most do not get right up on it. If you
want to be perfect for perfects sake then one more time with 600 wet, then
one more coat. Then STOP.

I would not, repeat not, polish the job until it has aged for a year. I.E.
Get it right the first time or to an acceptable conclusion and enjoy all
the benefits of the hard work.

Relax it will look great!

-- 
C.B. Currier
Infinity #57
Daybreak #458


Bill Blevins said:
> I'm trying to decide whether or not to wet sand to 600 again and apply my
> fourth (and final) coat of (black) Interlux Brightside or to try buffing
> my
> near perfect third coat and calling it a day and move on to the white deck
> painting. I just get nervous because I've sprayed 3 near-perfect coats of
> black over two coats of primer and don't know if if it's worth the STRESS
> of
> spraying one more round! I'm leaning towards one final coat and may try
> buffing first just to see what happens.
>
> Thanks Mike. I'll probably try the 3M "Finesse" on the stern before I
> start
> sanding again. I imagine it leaves a residue if I decide to spray one more
> coat. I'll read up.
>
> Bill Blevins
> Sabrina #158
>
> --
>
>
>
>> From: Mike Lehman <sail_505 at hotmail.com>
>> Reply-To: Alberg 30 Public List -- open to all
>> <public-list at alberg30.org>
>> Date: Tue, 22 Jun 2004 07:55:57 -0400
>> To: public-list at alberg30.org
>> Subject: RE: [Public-list] Interlux Brightside
>>
>> 3M "Finesse'
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>


 1087907321.0