[Public-list] Tiller pilot

[sousa, stephen (ENG)]

Matthew,

I have a Raytheon unit which is a little older.  The box containing the
compass is mounted  on a bracket in the cockpit and removed when not in use,
which ties into the tiller unit and power. This unit may be different than
the current designs. I also have a bracket mounted on the tiller (I can
measure the bracket next time on the boat) which ties into the tiller unit,
the other end has a bronze insert epoxied into the cockpit teak cover. 

Hope this helps.

Stephen

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Matthew Hay
Sent: Saturday, May 08, 2004 3:32 PM
To: public-list at alberg30.org
Subject: [Public-list] Tiller pilot


Has anyone installed a Raymarine ST series or similar autopilot?  I am 
curious were you mounted your fluxgate compass, and if you needed an 
additional bracket, other then the cantilever assembly?  If so, what size 
tiller bracket did you need in order to get the measurements to line up?
Thank you very much, Matthew #314 "Renard"

_________________________________________________________________
Getting married? Find tips, tools and the latest trends at MSN Life Events. 
http://lifeevents.msn.com/category.aspx?cid=married

_______________________________________________
Public-list mailing list
Public-list at alberg30.org http://alberg30.org/mailman/listinfo/public-list

 1084150235.0