[Public-list] Opening Ports

[sousa, stephen (ENG)]

Dave and Roger,

The owner of #115 in Oakland, CA did remove the large ports and install
smaller opening ports, not sure if Mr. Stephenson still owns the boat or is
monitoring the email string.

Stephen 

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Roger L Kingsland
Sent: Tuesday, November 30, 2004 4:26 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Opening Ports


I don't know if they have the right sizes but a fellow sailor did some
research on operable ports and thought these guys were a great value.

http://www.newfoundmetals.com/


----- Original Message ----- 
From: "Dave Terrell" <DTERRELL at message.nmc.edu>
To: <public-list at alberg30.org>
Sent: Tuesday, November 30, 2004 4:06 PM
Subject: [Public-list] Opening Ports


> Does anyone have experience or suggestions about replacing the fixed 
> ports in the salon with opening ports?
>
> This project started with a desire to fix leaks - of which much has 
> been said lately - and has grown to the point where if I am going to 
> take the ports out anyway, I am asking myself," Why not put in opening 
> ports while I am at it?" I am assuming I will not go broke in the 
> process.
>
> Any ideas and thoughts would be much appreciated. 
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org 
> http://alberg30.org/mailman/listinfo/public-list
>
>


_______________________________________________
Public-list mailing list
Public-list at alberg30.org http://alberg30.org/mailman/listinfo/public-list

 1101866356.0