[Public-list] #306 Found on Grenada

[Michael Connolly]

Tom,
I will measure and get back to you.
Michael

Tom Sutherland <sutherlandt at prodigy.net> wrote:
Michael,

Please do if it isn't too much trouble. I am the one who submitted the
34' 9-3/8" measurement and after reading your email I measured again
with a steel tape (mine is also on a rack beside my house) and the
measurement is as sent. I am sure my mast is the original for my 1970
alberg. As previously mentioned this is just the extrusion and does NOT
include the masthead. I also expect that ambient temperature could
effect this measurement a fraction of an inch or so with an aluminum
extrusion of this length.

Tom S
A30 No.412 
(1970)

Michael Connolly wrote:
> 
> Dave and George,
> Two readers have submitted mast lengths, one@ 34' 4" and one @ 34' 9-3/8". Would you like another measurement to confuse the issue even more? :-). My 1966 hull #133 is out of the water with the mast on a rack. I could easily measure the mast and boom for your reference. Let me know if you would like the measurements.
> Does anyone know if Alberg 30's came supplied with two or more mast heights? Whitby didn't supply a 'tall' rig, or did they?
> Dave, So happy that your boat hull came thru OK and that you are planning to repair and get her back in the water sailing again. I don't know what I would do if my boat was damaged beyond repair. It would be such a great loss to me.
> Michael
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1097777843.0