[Public-list] shaft bearing removal

[Mike Lehman]

It is screwed on to the stock. Put a pipe wrench on it an unscrew it. If it 
is sealed with caulking and maybe even 5200, you will need to heat it to 
soften that caulking. Don't burn the boat up!



              Mike Lehman
><((((º>¸.·´¯`·...¸><((((º>




----Original Message Follows----
From: "Roger L. Kingsland" <rkingsland101 at ksba.com>
Reply-To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
To: "Alberg30" <public-list at alberg30.org>
Subject: [Public-list] shaft bearing removal
Date: Fri, 22 Oct 2004 08:25:27 -0400

Albergers,

Because the shaft seems a little loose, last weekend a friend and I tried to 
remove the casting that contains the shaft and bearing.  It is at the aft 
end of the keel appears to be surface mounted.  We removed the bolts top and 
bottom and beat on it a little but it wouldn't budge.  Any suggestions 
please as to how to get it off without causing damage?

Thanks,

Roger Kingsland
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list



 1098450399.0