[Public-list] shaft bearing removal

[FINNUS505 at aol.com]

In a message dated 10/22/2004 7:22:40 PM Eastern Standard Time,  
sousa_stephen at emc.com writes:

I  install a socket a little smaller than the shaft and install the bolts
then  install the transmission coupling, this acts as a press to remove  the
shaft.  This will push the shaft out of the coupling. I have been  using Rust
Buster on rusted nuts/bolts and very impressed with its  performance, give
the shaft a few shots for about 3 days.  This  product is available at Auto
Zone.



thx, Stephen, too!! :)
Lee

 1098503382.0