[Public-list] Lexan or Acrylic ?

[Tom Sutherland]

David ... I am not sure I recall the "three tape" method of bedding.
Could you elaborate a little bit. I don't recall it from this list but I
am sure I could have missed it.

Tom S
Alberg 30 # 412

David Timmins wrote:
> 
>   Thanks everyone for your input, looks like a even split
> between the two materials. I have posted a sampling of
> your comments to the Alberg 22 Group. They can draw
> their own conclusions and chose the material that they feel
> most comfortable using.
> A ban saw is defiantly the tool of choice when cutting acrylic
> When a full sized sheet has to be ripped, I've noticed my guys
> raising the table saw blade to it's full height to help dissipate
> the heat.
> I think that I have this group to thank for the "three tape" method
> of bedding... pretty sure I read it here.
> I used that system with great success when bedding my
> port-lights and again, more recently, while re-bedding all my deck
> hardware during
> Elusive's refit.
> If I'm mistaken about the source of this information , let me know and
> I'll
> post it... saved me from getting silicone and bedding material over
> everything.
> David Timmins
> Elusive AL 22
> 
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

 1096378202.0