[Public-list] Lexan or Acrylic ?

[sousa, stephen (ENG)]

George,

Great job in documenting the port replacement. At the end of this document
you mention butyl rubber as an alternative, this is product we used and it
worked well. This application eliminated any sealant from being pushed out
onto the lexan and you can snug up the screws immediately. Also this product
is generally available from any good glass shop in your area.

Stephen

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of George Dinwiddie
Sent: Wednesday, September 29, 2004 10:48 PM
To: sutherlandt at prodigy.net; Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Lexan or Acrylic ?


It's done.  See http://alberg30.org/maintenance/HullDeck/Portlights/

Tom Sutherland wrote:
> That would great George ... I am sure it would be of great interest 
> for those of us out here in the hinterlands.
> 
> tom s
> A30 412
> 
> George Dinwiddie wrote:
> 
>>One of these days I'll write up the portlight replacement we did at 
>>the Spring Maintenance Rendezvous.

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------



_______________________________________________
Public-list mailing list
Public-list at alberg30.org http://alberg30.org/mailman/listinfo/public-list

 1096545015.0