[Public-list] Masthead Toggles

[Chris Lawrence]

Chris - I had the same problem exactly. I have emialed Stephen to find out
because it looks like the head may have been made a little bit tighter than
was intended. I am wondering if we can file back the aluminium grooves just
enough to allow the toggle to fit...?
I will wait and see what Stephen says since it seems this is a common
problem

Chris Lawrence
24 Scarborough Road
Toronto, Canada M4E 3M5
T: 416-698-5136 F: 416-698-8953 E: chris.lawrence at sympatico.ca


-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Christos Katehis
Sent: 08 April 2005 22:45
To: 30 list A
Subject: [Public-list] Masthead Toggles


Hello all; I tried to use the Schaefer Toggle #93-87,  West Marine part
#285595 and it did not fit. It was too large. The 1/2 pin fits but the body
ofthe toggles is too large to fit the new mast head. Does anyone know what
they've used?

Chris
Kasia#383
_______________________________________________
Public-list mailing list
Public-list at alberg30.org http://alberg30.org/mailman/listinfo/public-list


 1113076766.0